Digital Metal Tube Rotameter
Digital Gas Flow Meter with totalizer
Steam jacket Digital Flow Meter
Metal Tube Variable Area Flow Meters (Rotameters)
Glass Tube Rotameter
Glass Tube Rotameter With Transmitters
Purge Glass Tube Rotameter
Acrylic Body Rotameter
Orifice Plate And Assembly
Tubular type level Indicator
Side Mounted Magnetic Level Indicator
Reflex Level Indicators
Float & Board Type Level Indicator
Top Mounted Level Indicator
Side Mounted Magnetic Level Switch
Top Mounted Level Switch
Calibration Pots
Capacitance type level Measurement (Transmitter)
Double Window Type Sight Glass
Manometer

Capacitance Type Level Transmitter

We are the leading manufacturer, exporter and supplier of Capacitance type level measurement.

Capacitance type level measurement are based on the physical properties of a capacitor. Capacitance of a capacitor formed by two parallel plate electrodes is
1. Directly proportional to area "A" of the electrode.
2. Inversely proportional to distance 'd' between the plates & 
3. Directly proportional to die-electric 'δ' positioned in between them.

C = δ A / d

The probe of the level sensor forms an electrical capacitor with the surrounding metal container wall when the vessel empty; an initial capacitance exists between the electrode level sensor & the metal wall. When the sensor is covered with liquid the value of this capacitor increases and the capacitance change is measured and converted into an output signal proportional to the capacitance change.

Depending on the application is requirement, a part or fully insulated flexible or solid rod probe is selected. The probe head contains the electric capacitance and current transducer.

The System consists of 2 units

  • Indicator :- Mounted where Indication is require.
  • Prob Unit .  :- Mounted on top of the tank.

These are used for conductive liquids.
Water, Effluent, Milk, Beer, Acids and Alkalis etc.


Technical Description


  • Measuring Range : 50 To 2000 mm ruggedprobe 2000 t0 10000 mm flexprobe
  • Transmitter Type : Loop powered
  • Supply Voltage : 12 To 24 V Dc
  • Out Put : 4–20ma @ constant current load of 500 Ohms
  • Pressure Rating : 6 Kg / cm2
  • Temperature : -20 To 100° C
  • Enclosure : Die cast alumimium duly approved flame proof abs duly approved for ip 65 / 67
  • Resulution : 0.1
  • Accuracy : +/- 0.25% FSR

We are Exporters & Suppliers in Following States

Maharashtra: Nagpur, Nashik, Thane, Washim, Pune, Ahmednagar, Solapur, Amravathi, Mumbai, Aurangabad, Kolhapur,Navi Mumbai, Dhule, Chandrapur,etc.
Gujarat: Morbi, Porbandar, Surat, Godhra, Veraval, Gandhidham, Ahmedabad, Anand, Jamnagar, Vadodara, Navsari, Rajkot, Bhavnagar, Nadiad, Botad, Bharuch, Ankleshwar etc.
Madhya Pradesh: Singrauli, Morena, Burhanpur, Ratlam, Bhind, Sagar, Guna, Dewas, Satna, Jabalpur, Bhopal, Indore, Gwalior, Rewa, Shivpuri, Ujjain, Khandwa, Vidisha, Murwara, Chhindwara, etc.
Andhra Pradesh: Guntur, Nellore, Chittoor, Rajahmundry, Anantapur, Kurnool, Khammam, Ongole, Proddatur, Adoni, Kadapa, Mahbubnagar, Tirupati, Karimnagar, Ramagundam, Warangal, Hyderabad, Madanapalle, Eluru, Vijayawada, Telangana, Visakhapatnam etc.
Uttarakhand: Bageshwar, Tehri-Garhwal, Roorkee, Kashipur, Udhamsinghnagar, Rishikesh, Nainital, Rudrapur, Dehradun, Pithoragarh, Rudraprayag, Champawat, Chamoli, Haridwar, Uttarkashi, Almora, Garhwal, etc.
Tamil Nadu : Coimbatore, Chennai, Madurai, Tiruchirappalli, Tiruppur
Uttar Pradesh : Kanpur, Lucknow, Ghaziabad, Allahabad
Punjab and Chandigarh : Amritsar, Jalandhar, Patiala, Haryana, Ludhiana
Odisha : Bhubaneshwar, Cuttack, Madurai, Sundargarh
Karnataka : Bengaluru
Rajasthan : Jaipur
Other Cities/States: Sikkim, Asam, Tripura, Daman and Diu, Jharkhand, Ranchi ,Jammu and Kashmir,Srinagar Delhi, New Delhi, West Bengal, Kolkata, Darjeeling, Jalpaiguri, Kerala, Kochi, Goa etc.